PaperCut

Installing the Client

Macintosh

Run the installer on smb://balder.hampshire.edu/private/papercut-client/mac/client-local-install

The config.properties file should have the following options already set:

auth-ttl-default=0
auth-ttl-values=0
minimized=Y
noquit=Y
server-ip=192.33.12.94
server-name=salmoneus
server-port=9191
user=guest

Add a printer with:

1. System Preferences -> Print and Fax
2. Click that tiny little plus icon at the bottom of the list of printers
   1. Protocol: Internet Printing Protocol - IPP
   2. Address: papercut.hampshire.edu
   3. Queue: printers/LO_3rd_Floor
   4. Name: papercut.hampshire.edu
   5. Location: <blank>
   6. Print Using: Generic PostScript Printer

Windows

Install client from \\balder.hampshire.edu\private\papercut-client\win\client-local-install.exe

The config.properties file should have the following options already set:

auth-ttl-default=0
auth-ttl-values=0
minimized=Y
noquit=Y
server-ip=192.33.12.94
server-name=salmoneus
server-port=9191
user=guest

Set up a printer by:

1. Start -> Devices and Printers -> Add a printer
2. Network Printer -> "The printer I want isn't listed"
3. Select a shared printer by name -> http://papercut.hampshire.edu:631/printers/LO_3rd_Floor
4. Generic -> MS Publisher Color Printer

Adding a Printer

1. Add the printer via the CUPS interface
   1. First create a tunnel to the PaperCut server with ssh -NL 8080:127.0.0.1:631 papercut
   2. Browse to http://localhost:8080/admin
   3. Click Add Printer
      • At this point you will be prompted for your LDAP username and password. A warning may appear that your password will be sent in clear text but remember that it will be sent in the clear to localhost:8080 which is a secure tunnel to papercut:631 so don't worry about it.
   4. Choose AppSocket/HP JetDirect
   5. Enter the path to the printer (e.g. socket://loxx4260-1.hampshire.edu:9100)
   6. Enter the Name, Description and Location of the printer and click Share This Printer
   7. Under Or Provide a PPD File click Choose File and select a PPD
      • xr_generic.ppd can be found on \\Balder\private\Xerox for Xerox WorkCentre printers
   8. Click Query Printer for Default Options
2. Enable the printer for use with PaperCut
   1. SSH to the PaperCut server
   2. Run sudo /home/papercut/providers/print/linux-x64/configure-cups
      • You will be prompted to set the status of each CUPS printer for use with PaperCut. You want to (L)eave most of them enabled which you can do by just pressing Enter. You want to enable your new printer by typing "e" and enter.
3. Verify printer addition
   1. Log into https://salmoneus.hampshire.edu:9192/admin with admin / ieRe1che